Analogue PBX Main Units

 
KX-TES824NZ

KX-TES824NZ

Advanced Hybrid Telephone System

Features Overview

  • Up to 8 CO lines and 24 Extensions
  • Built in DISA / Message on Busy
  • Built-in Extension CLI
  • Bulit in Modem
  • Voice Message (Optional)
  • Built-in USB Port for PC Programming
 

The KX-TES824NZ is initially configured to 3 exchange lines and 8 extensions. With optional cards you can easily expand the capacity up to 8 exchange lines and 24 extensions. The system comes with built-in DISA / Message on busy, Extension Caller ID, Remote Modem and USB Port for PC Programming.

Featuring DISA (Direct Inward System Access) which allows outside callers to access any extension without going through an operator. Automatic greeting messages can be recorded by the operator of manager, directing the call to an appropriate department or destination. The system is smart enough to even detect an incoming fax transmission - routing the call automatically to a designated fax extension.

Extension Caller ID compatibility displays the incoming caller's phone number or name when used with a Panasonic proprietary display telephone. Up to 20 calls can be logged per extension.

The Optional Voice Message Card ensures you will never miss a call when you are not available. You can customise you voice mailbox, by recording your own greetings which will be played when you cannot answer your phone. This system supports the KXT7700 series range of telephones (KXT7735, KXT7730).

SYSTEM CAPACITY (MAX.)
Operator: 1
System Speed Dialling: 100
Personal Speed Dialling: 10 / Ext.
One-Touch Dialling: Max 24 / Ext
Extension Groups: 8
UCD Group: 1
Toll Restriction Levels: 5
Account Codes (Verified): 50
Call Park: 10
Call Log (Caller ID) *3: 20 Personal, 300 Common
Absent Messages: 6
Message Waiting: 8 / Ext
Emergency Codes: 5
External Music Source: 1
External Pager: 1
Doorphones: 4
Door Openers: 4
DSS Consoles: 2
Outgoing Messages (DISA): 360 sec
Outgoing Messages (BV): 125 messages or 60 min (/1 ch)
SPECIFICATIONS
Maximum Capacity: 8 COs, 24 Extensions, (16-Hybrid 8:SLT)
Intercom Paths: 4
Dialling Method - External: Tone (DTMF) / Pulse (10 pps, 20 pps)
Dialling Method - Internal: Tone (DTMF) / Pulse (10 pps, 20 pps)
Dialling Conversion: Pulse - DTMF
Connections - CO Line: Modular Jack (2-wire)
Connections - Intercom: Modular Jack (4-wire)
Connections - Paging: Conductor Jack
Connections - External Music: Conductor Jack
Connections - SMDR: RS-232C / F Port (9 pin D-SUB)
Connections - Programming: RS-232C / USB / Remote Modem
SMDR Detail Recording: Date, Time, Extension Number, CO Line Number, Dialled Number, Call Duration, Account Code, Caller ID*3
Polarity Reverse Detection*2: Yes
Voice Mail Ports: 2 ports (APT or DTMF)
DTMF Receivers: 2
DTMF Generator: 1
CO - CO Transfer Path: 2
Power Failure Transfer Ports: 1
Direct Connection to External Battery: Yes
Power Source: AC 110 - 240 V, 50 / 60 Hz
Power Consumption: 45 W

*1:  An Optional Card is required.
*2:  Polarity Reverse Detection is subject to the telephone company services in your country. 3
*3: Please contact your dealer or phone company to confirm if the Caller ID service is available in your area.
*4:   Doorphone #1 and Doorphone #2 can not be used at the same time. Doorphone #3 and Doorphone #4 can not be used at the same time.
APT:  Analogue Proprietary Telephone
SLT:  Single Line Telephone